Surface Care Guideline
Sanitary Bin Wall-Mount Installation & AS 1428.1 Washroom Compliance
Partition Wall Mounting, Height Specifications & Accessibility Compliance
Step-by-step instructions for wall-mounting commercial sanitary disposal units in compliance with Australian accessibility standards (AS 1428.1).
Step-by-Step Surface Care Procedure
1
Locate Partition Stud or Mounting Zone
Position the mounting bracket 100mm to 150mm above the finished floor level on the partition wall adjacent to the toilet pan.
2
Secure Wall Bracket
Use partition-safe short fasteners or high-bond commercial adhesive tape for compact laminate partitions.
3
Mount & Lock Unit into Place
Slide the SaniPod unit onto the bracket until the security locking tab clicks firmly into place.
Technical Care Recommendations
Australian Standards (AS 1428.1) & Partition Installation
Properly mounting sanitary disposal units ensures accessibility compliance and makes routine bathroom cleaning fast and unobstructed.
Mounting Guidelines - **Mounting Height:** Standard installation is 100mm–150mm above finished floor level. - **Accessible Cubicles (AS 1428.1):** Install within easy reach of the toilet pan without encroaching on required circulation clearances.
Frequently Asked Questions
No. SaniPod brackets use short, non-penetrating screws and structural VHB adhesive tape specifically designed for 13mm compact laminate partitions.
Surface-Safe Chemicals & Tools
Approved Maintenance Bundle
Chemicals tested within this substrate's safe pH and porosity limits.
